Abarth - 1.4 T-Jet - 135-BHP - 101-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 135 | 170 | 187 |
| Couple (Nm) | 206 | 300 | 330 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Abarth |
| An: (01/2009 - 01/2015) |
| Modèle: 500 |
| Le carburant: Petrol |
| Moteur: 1.4 T-Jet - 135-BHP - 101-KW |
| Chip tuning: 312 A1.000 |
| Moteur Écu: BOSCH ME7.9.10 |
| : Sealed all around, remove one side |
| Appareils de lecture: Behind panel, side of steering wheel |
| OBD: ENU_ME7p9p10 |
Appareils de lecture
| KESSV2: OBD - VR/ID Only |
| Kess V2 Protocollo: 121 |
| Kess V2 Aiuto: ENU_L_0024 |
| Protocollo KTAG: 24 |
| KTAG Aiuto: ENU_L_0024 |
| Processore KTAG: Boot(ST) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD Only |
| CMD: OBD/Boot/Bench |
Solutions disponibles
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Noter 1
At end of programming follow KESS sequence carefully
Noter 2
Safe OBD2 ID and write - original file nearly always in stock
