Audi - 2.0 TFSi - 200-BHP - 149-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 200 | 240 | 264 |
| Couple (Nm) | 280 | 360 | 396 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Audi |
| An: (05/08-04/13) (01/2008 - 01/2013) |
| Modèle: A3 Cabriolet |
| Le carburant: Petrol |
| Moteur: 2.0 TFSi - 200-BHP - 149-KW |
| Chip tuning: CAWB |
| Moteur Écu: BOSCH MED17.5 |
| : Sealed all around, remove one side |
| Appareils de lecture: Above pedals |
| OBD: ENU_094300CAN1 |
Appareils de lecture
| KESSV2: OBD |
| Kess V2 Protocollo: 203 |
| Kess V2 Aiuto: ENU_L_MEDV17_VAG |
| Protocollo KTAG: 128 |
| KTAG Aiuto: ENU_L_MEDV17_VAG |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: OBD/Boot |
| X17: OBD/Boot/Bench |
| CMD: OBD/Boot/Bench |
Solutions disponibles
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: YES |
| DTC: YES | EVAP: YES |
| HARDCUT: NO | POP & BANG: YES |
| EXAUST FLAP: YES | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: YES |
Noter 1
Requires K-TAG read to obtain correct original file if Alientech do not have it on database
Noter 2
Some software numbers may have OBD protection. In the event of writing to a protected ECU, please recover original file onto ECU by obd2, do not remove ecu from vehicle
