BMW - 2.0 - 143-BHP - 107-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 143 | 150 | 165 |
| Couple (Nm) | 190 | 205 | 226 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: BMW |
| An: (01/2007 - 01/2011) |
| Modèle: 118i Hatchback |
| Le carburant: Petrol |
| Moteur: 2.0 - 143-BHP - 107-KW |
| Chip tuning: N43B20M1 |
| Moteur Écu: SIEMENS MSD81.2 |
| Appareils de lecture: Kick panel, driver's side |
| OBD: ENU_MO_0202 |
Appareils de lecture
| KESSV2: OBD |
| Kess V2 Protocollo: 202 |
| Protocollo KTAG: 991 |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: Bench Only |
| X17: OBD Only |
| CMD: OBD/Boot/Bench |
Solutions disponibles
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: YES | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: YES |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Noter 1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write
