Ford - 2.0 TDCi - 150-BHP - 112-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 150 | 200 | 220 |
| Couple (Nm) | 370 | 450 | 495 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Ford |
| An: (01/2015 - Present) |
| Modèle: Galaxy |
| Le carburant: Diesel |
| Moteur: 2.0 TDCi - 150-BHP - 112-KW |
| Moteur Écu: DELPHI DCM6.1 |
| : Sealed all around, remove one side |
| OBD: ENU_094300CAN1 |
Appareils de lecture
| KESSV2: OBD |
| Kess V2 Protocollo: 536 |
| Kess V2 Aiuto: ENU_L_0300 |
| Protocollo KTAG: 1118 |
| KTAG Aiuto: ENU_L_0300 |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: OBD Only |
| X17: OBD Only |
| CMD: OBD Only |
Solutions disponibles
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: YES | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Noter 1
If the ECU goes into sleep mode after 1-2 minutes, go into menu in car and set AUTO ENGINE OFF, this will allow reading and writing to be carried out
