Renault - 1.2 - 100-BHP - 75-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 100 | 125 | 138 |
| Couple (Nm) | 155 | 200 | 220 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Renault |
| An: (01/2010 - 01/2012) |
| Modèle: Wind |
| Le carburant: Petrol |
| Moteur: 1.2 - 100-BHP - 75-KW |
| Chip tuning: TCEGT |
| Moteur Écu: SIEMENS SIM32 |
| Appareils de lecture: In glove box |
| OBD: ENU_094300CAN1 |
Appareils de lecture
| KESSV2: OBD |
| Kess V2 Protocollo: 123 |
| Kess V2 Aiuto: ENU_L_0252 |
| Protocollo KTAG: 252 |
| KTAG Aiuto: ENU_L_0252 |
| Processore KTAG: Jtag(Renesas) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: OBD Only |
Solutions disponibles
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Noter 1
Clean surface of probe points well, if not reading/writing clean again
Noter 2
On keyless, put card in slot, into first gear and push button for 10 seconds until 'Remove card' comes up on dash
