Volvo - 2.5 T5 - 210-BHP - 157-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 210 | 245 | 270 |
| Couple (Nm) | 320 | 380 | 418 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Volvo |
| An: (01/2004 - 01/2008) |
| Modèle: S60 |
| Le carburant: Petrol |
| Moteur: 2.5 T5 - 210-BHP - 157-KW |
| Moteur Écu: BOSCH ME7.0 |
| : Opens one side |
| Appareils de lecture: Behind panel, near bonnet release |
Appareils de lecture
| KESSV2: Not yet supported - Check tool |
| Kess V2 Aiuto: ENU8_L_0626 |
| Protocollo KTAG: 626 |
| KTAG Aiuto: ENU8_L_0626 |
| Processore KTAG: Boot(ST) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: Not yet supported - Check tool |
| CMD: Not yet supported - Check tool |
Solutions disponibles
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Noter 1
A canbus Uxxxx code can be displayed on the scantool after the remap relating to "Internal Control Module Software Incompatibility/Control Module, faulty software checksum ECM". Unfortunately there is no fix for this. This will not trigger a mil code nor trigger limp mode, its a background code to mark to Volvo the ECU has been remapped.
Noter 2
Possible chip change
