BMW - 2.0 - 122-BHP - 91-KW
Geschätzte %30 mehr Leistung und %40 mehr Drehmoment
| Parameter | original | Stage 1 | Stage 2 |
|---|---|---|---|
| Leistung (Hp) | 122 | 145 | 160 |
| Drehmoment (Nm) | 185 | 200 | 220 |
Fahrzeuginformationen
| Fahrzeug: cars |
| Marke: BMW |
| Jahr: (01/2007 - 01/2011) |
| Modell: 116i Hatchback |
| Treibstoff: Petrol |
| Motor: 2.0 - 122-BHP - 91-KW |
| Chip tuning: N43B20 |
ECU-Informationen
| Motor Ecu: SIEMENS MSD81.2 |
| Lesegeräte: Kick panel, driver's side |
| OBD: ENU_MO_0202 |
Lesegeräte
| KESSV2: OBD |
| Kess V2 Protocollo: 202 |
| Protocollo KTAG: 991 |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: Bench Only |
| X17: OBD/Boot/Bench |
| CMD: OBD/Boot/Bench |
Verfügbare Lösungen
| DPF: NO | EGR: NO |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: NO | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: YES | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: NO | BOOST SENSOR: YES |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Notiz 1
If push button ignition please follow these steps. 1. hold button for 4 seconds and release. Dash should illuminate, if it doesn?t press once more. Onnce dash illuminated proceed to read/write. When kess prompts to cycle ignition just ignore and select next. Without doing this will still read but fail on write
