Audi - 2.0 TDi - 140-BHP - 104-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 140 | 180 | 198 |
| Couple (Nm) | 320 | 400 | 440 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Audi |
| An: (01/2008 - 01/2013) |
| Modèle: A3 Cabriolet |
| Le carburant: Diesel |
| Moteur: 2.0 TDi - 140-BHP - 104-KW |
| Moteur Écu: BOSCH EDC17CP14 |
| : Sealed all around, remove one side |
| Appareils de lecture: Above pedals |
| OBD: ENU_MO_0501 |
Appareils de lecture
| KESSV2: OBD - VR/ID Only |
| Kess V2 Protocollo: 501 |
| Kess V2 Aiuto: ENU_L_EDC17_VAG |
| Protocollo KTAG: 151 |
| KTAG Aiuto: ENU_L_EDC17_VAG |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: OBD/Boot/Bench |
| X17: OBD/Boot/Bench |
| CMD: OBD/Boot/Bench |
Solutions disponibles
| DPF: YES | EGR: YES |
| ADBLUE: YES | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: YES | POP & BANG: NO |
| EXAUST FLAP: YES | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: YES |
| MAF: YES | BOOST SENSOR: YES |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: YES |
Noter 1
Early software versions are OBD, please send us KESSv2 read first for us to confirm whether vehicle is OBD or K-TAG.
Noter 2
Software versions beginning with 10373 are SAFE to write OBD. Software versions with 10375 are NOT safe to write OBD. Please ask support if your unsure.
