Audi - 2.0 TDi - 190-BHP - 142-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 190 | 225 | 248 |
| Couple (Nm) | 400 | 470 | 517 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Audi |
| An: (01/2016 - Present) |
| Modèle: A4 AllRoad |
| Le carburant: Diesel |
| Moteur: 2.0 TDi - 190-BHP - 142-KW |
| Chip tuning: DESA - DETA - DFVA |
| Moteur Écu: BOSCH EDC17C74 |
| : Sealed all around, remove one side |
| Appareils de lecture: Above pedals |
| OBD: ENU_MO_0510 |
Appareils de lecture
| KESSV2: OBD - VR/ID Only |
| Kess V2 Protocollo: 510 |
| Kess V2 Aiuto: ENU_L_EDC17_VAG_GPT |
| Protocollo KTAG: 705 |
| KTAG Aiuto: ENU_L_EDC17_VAG_GPT |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: OBD/Boot/Bench |
| X17: OBD/Boot/Bench |
| CMD: OBD/Boot/Bench |
Solutions disponibles
| DPF: YES | EGR: YES |
| ADBLUE: YES | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: YES | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: YES | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: NO |
Noter 1
Will normally read OBD, connect to internet if on Master tool, or I.D. only if Slave
