Peugeot - 2.0 HDi - 136-BHP - 101-KW
Win tot 30% meer vermogen en 40% meer koppel
| paramteres | origineel | Stage 1 | Stage 2 |
|---|---|---|---|
| Het vermogen (Hp) | 136 | 166 | 183 |
| Koppel (Nm) | 320 | 380 | 418 |
Voertuig informatie
| Voertuig: cars |
| Merk: Peugeot |
| Jaar: (01/2002 - 01/2005) |
| Model: 307 SW |
| Brandstof: Diesel |
| Motor: 2.0 HDi - 136-BHP - 101-KW |
| Chituning: RHR(DW10BTED4) |
Ecu informatie
| Motor ecu: SIEMENS SID803A |
| : Opens one side |
| Leesbare apparaten: Behind panel, side of steering wheel |
| OBD: ENU_094300CAN1 |
Leesbare apparaten
| KESSV2: OBD - VR/ID Only |
| Kess V2 Protocollo: 47 |
| Kess V2 Aiuto: ENU_L_SID_803A_PSA |
| Protocollo KTAG: 78 |
| KTAG Aiuto: ENU_L_SID_803A_PSA |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: OBD Only |
| X17: Not yet supported - Check tool |
| CMD: OBD/Boot/Bench |
Beschikbare oplossingen
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: NO |
| LAUNCH CONTROL: NO |
Opmering 1
If BDM adaptors does not read make direct soldered connection
Opmering 2
Safe OBD2 ID and write - original file nearly always in stock. Requires 5WS4 xxx xx-x number off ECU label mentioned on upload, as well as KESS ID, to source original file
