Volvo - 2.0 TD - 177-BHP - 132-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 177 | 216 | 238 |
| Couple (Nm) | 400 | 476 | 524 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Volvo |
| An: (01/2009 - 01/2012) |
| Modèle: C30 |
| Le carburant: Diesel |
| Moteur: 2.0 TD - 177-BHP - 132-KW |
| Chip tuning: D5204T |
| Moteur Écu: BOSCH EDC17CP22 |
| : Sealed all around, remove one side |
| Appareils de lecture: Above pedals |
| OBD: ENU_MO_0638 |
Appareils de lecture
| KESSV2: OBD - After K-Tag unlock |
| Kess V2 Protocollo: 638 |
| Kess V2 Aiuto: ENU_L_EDC17_VOLVO |
| Protocollo KTAG: 158 |
| KTAG Aiuto: ENU_L_EDC17_VOLVO |
| Processore KTAG: Boot(Tricore) |
| AUTOTUNER: Boot/Bench |
| X17: Boot/Bench |
| CMD: Boot/Bench |
Solutions disponibles
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: NO |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: YES | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: NO |
Noter 1
A canbus Uxxxx code can be displayed on the scantool after the remap relating to "Internal Control Module Software Incompatibility/Control Module, faulty software checksum ECM". Unfortunately there is no fix for this. This will not trigger a mil code nor trigger limp mode, its a background code to mark to Volvo the ECU has been remapped.
