Volvo - 2.4 TD - 185-BHP - 138-KW
Estimation de 30 % de puissance en plus et de 40 % de couple en plus
| parametre | Stage 1 | Stage 2 | |
|---|---|---|---|
| La puissance (Hp) | 185 | 217 | 239 |
| Couple (Nm) | 400 | 450 | 495 |
Informations sur le véhicule
| Véhicule: cars |
| Marque: Volvo |
| An: (01/2002 - 01/2006) |
| Modèle: XC90 |
| Le carburant: Diesel |
| Moteur: 2.4 TD - 185-BHP - 138-KW |
| Chip tuning: D5244T4 |
| Moteur Écu: BOSCH EDC16C31 |
| : Opens both sides, board flip |
| Appareils de lecture: Behind panel, above pedals |
| OBD: ENU_MO_0172 |
Appareils de lecture
| KESSV2: OBD |
| Kess V2 Protocollo: 172 |
| Kess V2 Aiuto: ENU_L_EDC16 |
| Protocollo KTAG: 68 |
| KTAG Aiuto: ENU_L_EDC16 |
| Processore KTAG: Bdm(MPC5xx) |
| AUTOTUNER: Not yet supported - Check tool |
| X17: OBD/Boot |
| CMD: OBD/Boot |
Solutions disponibles
| DPF: YES | EGR: YES |
| ADBLUE: NO | TVA: YES |
| HOT START: NO | SAP: NO |
| DTC: YES | EVAP: NO |
| HARDCUT: NO | POP & BANG: NO |
| EXAUST FLAP: NO | GPF OFF: NO |
| TQM: NO | SPEED LIMIT: YES |
| START STOP: NO | LAMBDA: NO |
| MAF: NO | BOOST SENSOR: NO |
| SPORT DISPLAY: NO | SWIRL FLAP: YES |
| LAUNCH CONTROL: NO |
Noter 1
On OBD access to ECU is required to program
Noter 2
A canbus Uxxxx code can be displayed on the scantool after the remap relating to "Internal Control Module Software Incompatibility/Control Module, faulty software checksum ECM". Unfortunately there is no fix for this. This will not trigger a mil code nor trigger limp mode, its a background code to mark to Volvo the ECU has been remapped.
